There is perhaps no more appropriately named plumbing fixture in the whole world than the tankless water heater. No deception, no confusion: It’s a water heater that has no hot-water storage tank. So, where does the hot water come from? Good question!
Tankless water heaters, while relatively new, are growing in popularity with both plumbing contractors and homeowners. These compact units are designed to provide hot water for the entire house—not just a single faucet—and are often called instantaneous, continuous-flow, or on-demand water heaters. Before getting into the specifics of tankless water heaters, let’s first take a look at standard water heaters.
Storage-Tank Water Heaters
Most homes have a standard water heater, which consists of a large cylindrical storage tank. Cold water is piped into the tank and electrical elements, or a gas-fired burner located inside the tank heats the water. An electronic thermostat allows you to control the water temperature. The heated water is stored in the tank until someone turns on a hot-water faucet or shower, or runs the dishwasher. Then, hot water is pumped out of the tank and through the home’s hot-water supply pipes.
Tank-style water heaters are popular because they’re affordable, readily available from several manufacturers, quick and easy to install, and available in a wide range of sizes. However, they do have a few drawbacks.
First, as mentioned earlier, hot water is stored in the tank. When the water temperature cools slightly, the heater kicks on to warm the water back to the pre-set temperature. That means the heater is working—and burning energy—regardless of whether you’re using hot water.
Also, because there’s a storage tank, that means there’s a limited supply of hot water available at any one time. So, while modern tank-style heaters do an adequate job of keeping up with demand most of the time, if there are multiple hot-water users at the same time (such as someone taking a shower while the dishwasher or washing machine is running), then the heater will struggle to supply enough hot water.
Another drawback is that the large storage tank takes up quite a bit of space. That might not be a problem in a spacious basement, but it’s often difficult to squeeze one into a utility closet, laundry room, or crowded garage.
Tankless Water Heaters
Tankless water heaters have a few distinct advantages over standard water heaters, but before discussing those benefits, let’s take a look at how a tankless water heater works.
First, a tankless water heater sits idle until a hot-water tap is opened in the house. Then, cold water is drawn into the unit and a flow sensor activates an electric heating element or gas-fired burner, which warms an internal heat exchanger. As the cold water passes over the heat exchanger, it’s warmed to the pre-set temperature. The hot water then exits the heater and travels directly to the faucet or appliance—not to a storage tank. Combustion gases, which are produced by gas-fired units, are exhausted through a dedicated, sealed vent pipe.